{"title":"Epoxy","description":"\u003cp\u003eEverything you need to build, bond, and fair with professional-grade marine epoxy — all in one place. The Sea•Forge™ Epoxies collection brings together our clear epoxy resin, slow and fast hardener systems, and the full lineup of structural additives engineered for serious boatbuilding and composite repair.\u003c\/p\u003e\u003ch2\u003eResin \u0026amp; Hardener System\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSea•Forge LV Epoxy Resin (Part A)\u003c\/strong\u003e — Crystal-clear, low-viscosity resin formulated for deep wood penetration, laminating, and structural bonding above and below the waterline.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSea•Forge 2:1 Epoxy Hardeners (Part B)\u003c\/strong\u003e — Available in Slow and Fast cure speeds. Slow for large laminating jobs and warm-weather work; Fast for cooler conditions and high-production workflows.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEpoxy Additives\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeaForge Wood Flour\u003c\/strong\u003e — Ultra-fine structural filler that cures to a natural wood tone. Ideal for stitch-and-glue filleting, gap filling, and glue-ups that disappear under clear coats.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeaForge Colloidal Silica (ThixoShield)\u003c\/strong\u003e — Fumed silica thickener that adds true anti-sag performance to any epoxy mix. Dial in consistency from a bonding syrup to a stiff overhead fillet paste.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeaForge Cellulose Filler\u003c\/strong\u003e — Cotton-fiber blend for buttery, gap-bridging structural fillets and laminating joints. Lightweight, strong, and sandable with zero shrinkage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeaForge Phenolic Micro Balloons\u003c\/strong\u003e — Ultra-low-density hollow spheres for fairing large hull surfaces. Sands effortlessly and minimizes primer consumption.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMix and match additives to dial in the exact viscosity, color, and strength your project demands. All Sea•Forge additives are compatible with both Slow and Fast Hardener systems and are made in the USA.\u003c\/p\u003e","products":[{"product_id":"sea-forge-epoxy-resin-system","title":"Sea•Forge 2:1 Epoxy Kits","description":"\u003ch2\u003eStop Compromising. Start Building with Confidence.\u003c\/h2\u003e\n\u003cp\u003eStandard systems leave serious builders wanting more — limited working time control, inconsistent results, and formulas that weren't engineered for demanding marine environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSea•Forge is different.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur advanced 2:1 epoxy resin system was engineered from the ground up for boat builders, restorers, and serious DIYers who demand professional-grade performance. With two distinct Part A resins and three hardener speeds, you have complete control over every pour — from delicate laminating work to heavy structural builds.\u003c\/p\u003e\n\u003ch3\u003eChoose Your System\u003c\/h3\u003e\n\u003ch4\u003ePart A — Resin\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLV (Low Viscosity) Resin\u003c\/strong\u003e — Ultra-thin penetrating formula ideal for wood stabilization, dry fiberglass infusion, and deep penetration into porous substrates.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePart B — Hardener\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow Hardener\u003c\/strong\u003e — Maximum working time for large pours, warm weather work, and complex assemblies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMedium Hardener\u003c\/strong\u003e — The all-around choice for most marine applications and moderate temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Hardener\u003c\/strong\u003e — Quick cure for small repairs, cool weather work, and time-sensitive projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEvery Kit Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePart A Resin (your choice of Flag or LV)\u003c\/li\u003e\n\u003cli\u003ePart B Hardener (your choice of Slow, Medium, or Fast)\u003c\/li\u003e\n\u003cli\u003e2:1 calibrated pumps for accurate, mess-free dispensing\u003c\/li\u003e\n\u003cli\u003eMixing cup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy Sea•Forge Outperforms the Competition\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced 2:1 formulation\u003c\/strong\u003e — superior mechanical properties and moisture resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree hardener speeds\u003c\/strong\u003e — total control over working time in any condition\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo resin viscosities\u003c\/strong\u003e — the right tool for every job, from surface coating to deep penetration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngineered for marine environments\u003c\/strong\u003e — built to withstand the harshest saltwater, UV, and temperature extremes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhether you're building a new hull, restoring a classic wooden boat, or doing precision repairs, Sea•Forge gives you the system professionals trust — now available for the serious DIY builder.\u003c\/p\u003e","brand":"Pro Coatings","offers":[{"title":"1.5 Quart \/ Slow \/ LV","offer_id":64078341702001,"sku":"SF-LV-SLW-1.5QT","price":69.99,"currency_code":"USD","in_stock":false},{"title":"1.5 Quart \/ Medium \/ LV","offer_id":64078341767537,"sku":"SF-LV-MED-1.5QT","price":69.99,"currency_code":"USD","in_stock":false},{"title":"1.5 Quart \/ Fast \/ LV","offer_id":64078341833073,"sku":"SF-LV-FST-1.5QT","price":69.99,"currency_code":"USD","in_stock":false},{"title":"1.5 Gallon \/ Slow \/ LV","offer_id":64078341898609,"sku":"SF-LV-SLW-1.5GAL","price":189.99,"currency_code":"USD","in_stock":false},{"title":"1.5 Gallon \/ Medium \/ LV","offer_id":64078341964145,"sku":"SF-LV-MED-1.5GAL","price":189.99,"currency_code":"USD","in_stock":false},{"title":"1.5 Gallon \/ Fast \/ LV","offer_id":64078342029681,"sku":"SF-LV-FST-1.5GAL","price":189.99,"currency_code":"USD","in_stock":false},{"title":"3 Gallon \/ Slow \/ LV","offer_id":64078342095217,"sku":"SF-LV-SLW-3GAL","price":349.99,"currency_code":"USD","in_stock":false},{"title":"3 Gallon \/ Medium \/ LV","offer_id":64078342160753,"sku":"SF-LV-MED-3GAL","price":349.99,"currency_code":"USD","in_stock":false},{"title":"3 Gallon \/ Fast \/ LV","offer_id":64078342226289,"sku":"SF-LV-FST-3GAL","price":349.99,"currency_code":"USD","in_stock":false}]},{"product_id":"sea-forge-2-1-epoxy-resin","title":"Sea•Forge Epoxy Resin – Clear, Low Viscosity, 2:1","description":"\u003ch1\u003e\u003cspan\u003eEpoxy Resin\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eMarine Epoxy for Bonding, Laminating \u0026amp; Fiberglassing.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSea•Forge Epoxy Resin is the foundation of the Sea•Forge 2:1 Epoxy System. Its low-viscosity clear formula wets out fiberglass easily, penetrates wood surfaces, and provides strong adhesion for boatbuilding, repair, and composite work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePair with a Sea•Forge Part B Hardener selected for your working conditions and desired cure speed.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhy Builders Choose Sea•Forge Epoxy Resin\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eLow Viscosity:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Flows easily for fiberglass wet-out, coating, and laminating.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eClear Formula:\u003c\/strong\u003e Ideal for fiberglassing, coating, and applications where the natural appearance of the wood is important.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eExcellent Wood Penetration:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Soaks readily into wood surfaces for coating and bonding.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eExcellent Fiberglass Wet-Out:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Saturates fiberglass cloth easily and thoroughly.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eStrong Adhesion:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Designed for structural bonding of wood, fiberglass, and compatible composite materials.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eVersatile 2:1 System:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Choose the appropriate Sea•Forge Part B Hardener for your working conditions and desired cure speed.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eEasy to Thicken:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Combine with Sea•Forge fillers for bonding, filleting, fairing, and other specialized applications.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMarine Applications:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Formulated for boatbuilding, repair, restoration, and composite construction.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eLow VOC:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Formulated with low volatile organic compound content.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eSea•Forge 2:1 Epoxy System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart A — Epoxy Resin:\u003c\/strong\u003e Low-viscosity clear resin for coating, bonding, laminating, and fiberglass wet-out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart B — Hardeners:\u003c\/strong\u003e Select the appropriate Sea•Forge Hardener to adjust working and cure times for temperature, project size, and application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eAvailable Sizes:\u003c\/strong\u003e 1 Quart | 1\/2 Gallon | 1 Gallon | 5 Gallon | Bulk Containers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eOrigin:\u003c\/strong\u003e Made in the USA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlways mix \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e2 parts Part A Epoxy Resin : 1 part Part B Hardener by volume. Do not alter this ratio.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003ePrimary Applications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eFiberglass Wet Lay-Up | Wood Coating \u0026amp; Saturation | Structural Bonding | Fiberglass \u0026amp; Composite Laminating | Vacuum Bagging | Marine Repair \u0026amp; Restoration\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003eHow to Use\u003c\/span\u003e\u003c\/h3\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMeasure:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Mix \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e2 parts Sea•Forge Epoxy Resin : 1 part Sea•Forge Part B Hardener by volume. Do not alter this ratio.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Use graduated mixing cups for accurate measurement of small or large batches, or use calibrated 2:1 dispensing pumps. Test pumps for accuracy before first use and before mixing a large batch.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMix Thoroughly:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Stir the resin and hardener completely, scraping the sides and bottom of the mixing container.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eApply:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Use mixed epoxy for coating, fiberglass wet-out, laminating, and bonding.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eFor Bonding \u0026amp; Fillets:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e When thickened epoxy is needed, add the appropriate Sea•Forge filler only after the resin and hardener have been thoroughly mixed.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAllow to Cure:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Cure time varies with hardener selection, temperature, application thickness, and working conditions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003ePro Tip — Extend Your Working Time:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e When applying unthickened epoxy with a roller, pour the mixed epoxy into a lined paint tray rather than leaving it in the mixing cup. The shallow layer helps dissipate heat and extend working time. This is especially useful when applying fill coats or wetting out lighter composite fabrics such as 6 oz. E-glass fiberglass cloth.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSafety \u0026amp; Handling\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWear appropriate protective clothing, chemical-resistant gloves, and safety glasses when mixing and applying epoxy. Avoid skin and eye contact. Work in a well-ventilated area and follow all precautions and first-aid instructions provided on the product label and Safety Data Sheet (SDS).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003e⚠️ California Proposition 65 Warning:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Refer to the product label and SDS for applicable chemical information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eBrand:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Sea•Forge™ by Pro Coatings LLC\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFreight Shipping Notice:\u003c\/strong\u003e Orders of 15 gallons or more require freight shipping. Please \u003ca href=\"\/pages\/contact\"\u003econtact our customer service team\u003c\/a\u003e before placing your order to arrange shipping and receive a freight quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Documents:\u003c\/strong\u003e \u003ca href=\"#\" target=\"_blank\"\u003eTDS (Technical Data Sheet)\u003c\/a\u003e | \u003ca href=\"#\" target=\"_blank\"\u003eSDS (Safety Data Sheet)\u003c\/a\u003e\u003c\/p\u003e","brand":"Pro Coatings","offers":[{"title":"1 Quart \/ 1 Pint (16oz) - Fast \/ No Pumps Needed","offer_id":64104568095089,"sku":null,"price":74.99,"currency_code":"USD","in_stock":false},{"title":"1 Quart \/ 1 Pint (16oz) - Fast \/ Yes Add 2:1 Pump Kit for Resin and Hardener","offer_id":64104568127857,"sku":null,"price":89.99,"currency_code":"USD","in_stock":false},{"title":"1 Quart \/ 1 Pint (16oz) - Slow \/ No Pumps Needed","offer_id":64104568160625,"sku":null,"price":39.99,"currency_code":"USD","in_stock":false},{"title":"1 Quart \/ 1 Pint (16oz) - Slow \/ Yes Add 2:1 Pump Kit for Resin and Hardener","offer_id":64104568193393,"sku":null,"price":74.99,"currency_code":"USD","in_stock":false},{"title":"1 Quart \/ I want to choose my own \/ No Pumps Needed","offer_id":64337277059441,"sku":null,"price":89.99,"currency_code":"USD","in_stock":false},{"title":"1 Quart \/ I want to choose my own \/ Yes Add 2:1 Pump Kit for Resin and Hardener","offer_id":64337277092209,"sku":null,"price":39.99,"currency_code":"USD","in_stock":false},{"title":"1\/2 Gallon \/ 1\/2 Gallon - Fast \/ No Pumps Needed","offer_id":64104568324465,"sku":null,"price":198.99,"currency_code":"USD","in_stock":false},{"title":"1\/2 Gallon \/ 1\/2 Gallon - Fast \/ Yes Add 2:1 Pump Kit for Resin and Hardener","offer_id":64104568357233,"sku":null,"price":213.99,"currency_code":"USD","in_stock":false},{"title":"1\/2 Gallon \/ 1\/2 Gallon - Slow \/ No Pumps Needed","offer_id":64104568390001,"sku":null,"price":198.99,"currency_code":"USD","in_stock":false},{"title":"1\/2 Gallon \/ 1\/2 Gallon - Slow \/ Yes Add 2:1 Pump Kit for Resin and Hardener","offer_id":64104568422769,"sku":null,"price":213.99,"currency_code":"USD","in_stock":false},{"title":"1\/2 Gallon \/ I want to choose my own \/ No Pumps Needed","offer_id":64337277124977,"sku":null,"price":99.99,"currency_code":"USD","in_stock":false},{"title":"1\/2 Gallon \/ I want to choose my own \/ Yes Add 2:1 Pump Kit for Resin and Hardener","offer_id":64337277157745,"sku":null,"price":114.99,"currency_code":"USD","in_stock":false},{"title":"1 Gallon \/ 1 Gallon - Fast \/ No Pumps Needed","offer_id":64097208336753,"sku":"SF-LV-FST-3GAL","price":369.99,"currency_code":"USD","in_stock":false},{"title":"1 Gallon \/ 1 Gallon - Fast \/ Yes Add 2:1 Pump Kit for Resin and Hardener","offer_id":64104568586609,"sku":null,"price":379.99,"currency_code":"USD","in_stock":false},{"title":"1 Gallon \/ 1 Gallon - Slow \/ No Pumps Needed","offer_id":64104568619377,"sku":null,"price":219.99,"currency_code":"USD","in_stock":false},{"title":"1 Gallon \/ 1 Gallon - Slow \/ Yes Add 2:1 Pump Kit for Resin and Hardener","offer_id":64104568652145,"sku":null,"price":369.99,"currency_code":"USD","in_stock":false},{"title":"1 Gallon \/ I want to choose my own \/ No Pumps Needed","offer_id":64337277190513,"sku":null,"price":219.99,"currency_code":"USD","in_stock":false},{"title":"1 Gallon \/ I want to choose my own \/ Yes Add 2:1 Pump Kit for Resin and Hardener","offer_id":64337277223281,"sku":null,"price":234.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1613\/1185\/files\/SeaForge_Resin_gallon_jug.png?v=1788497750"},{"product_id":"sea-forge-2-1-epoxy-hardeners","title":"Sea•Forge Slow Epoxy Hardener – 2:1 Non-Blush","description":"\u003ch1\u003e\u003cspan\u003eSlow Hardener\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eExtended Working Time for Warm Conditions \u0026amp; Complex Projects.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSea•Forge Slow Hardener is a non-blushing Part B hardener designed for use with Sea•Forge Low Viscosity Epoxy Resin. Its slower cure provides extended working time for fiberglassing, laminating, bonding, and complex assemblies, especially in warmer working conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePair with Sea•Forge Low Viscosity Epoxy Resin as part of the Sea•Forge 2:1 Epoxy System.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhy Builders Choose Sea•Forge Slow Hardener\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eExtended Working Time:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Provides more time for fiberglassing, laminating, bonding, and complex assemblies.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eNon-Blushing Formula:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Designed to cure without amine blush, reducing surface preparation between coats.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eIdeal for Warm Conditions:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Slower cure provides additional working time as shop and material temperatures increase.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eExcellent for Large Laminations:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Extended working time provides more time to thoroughly wet out larger surfaces and heavier fiberglass and composite fabrics.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eComplex Assemblies:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Allows additional time for positioning, fitting, and multi-part bonding.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eStrong Adhesion:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Creates strong, durable bonds to wood, fiberglass, composites, and properly prepared metals.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eBalanced Strength \u0026amp; Flexibility:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Formulated to provide a strong, tough bond with the flexibility needed to accommodate normal movement and stresses in wood, fiberglass, and composite structures.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMarine Applications:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Formulated for boatbuilding, repair, restoration, and composite construction.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eLow VOC:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Formulated with low volatile organic compound content.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eSea•Forge 2:1 Epoxy System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003ePart A — Epoxy Resin:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Clear, low-viscosity resin for coating, bonding, laminating, and fiberglass wet-out.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003ePart B — Slow Hardener:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Extended working-time hardener for warmer conditions, larger laminations, and complex assemblies.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlways mix \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e2 parts Part A Epoxy Resin : 1 part Part B Hardener by volume. Do not alter this ratio.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003ePrimary Applications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eBoatbuilding | Warm-Weather Epoxy Work | Fiberglass \u0026amp; Composite Cloths | Vacuum Bagging | Structural Bonding | Filleting | Coating \u0026amp; Saturation\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003eHow to Use\u003c\/span\u003e\u003c\/h3\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMeasure:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Mix \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e2 parts Sea·Forge Low Viscosity Epoxy Resin : 1 part Sea•Forge Slow Hardener by volume. Do not alter this ratio.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Use graduated mixing cups for accurate measurement of small or large batches, or use calibrated 2:1 dispensing pumps. Test pumps for accuracy before first use and before mixing a large batch.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMix Thoroughly:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Stir the resin and hardener completely, scraping the sides and bottom of the mixing container.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eApply:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Use mixed epoxy for coating, fiberglass wet-out, laminating, and bonding.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eFor Bonding \u0026amp; Fillets:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e When thickened epoxy is needed, add the appropriate Sea•Forge filler only after the resin and hardener have been thoroughly mixed.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAdjust Cure Speed:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Sea•Forge Fast Hardener may be blended with Slow Hardener when an intermediate cure speed is desired. Maintain the required \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e2 parts resin : 1 part total hardener by volume\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e ratio.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAllow to Cure:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Cure time varies with hardener blend, temperature, application thickness, batch size, and working conditions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cspan\u003eSafety \u0026amp; Handling\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWear appropriate protective clothing, chemical-resistant gloves, and safety glasses when mixing and applying epoxy. Avoid skin and eye contact. Work in a well-ventilated area and follow all precautions and first-aid instructions provided on the product label and Safety Data Sheet (SDS).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003e⚠️ California Proposition 65 Warning:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Refer to the product label and SDS for applicable chemical information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eBrand:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e SeaForge™ by Pro Coatings LLC\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFreight Shipping Notice:\u003c\/strong\u003e Orders of 15 gallons or more require freight shipping. Please \u003ca href=\"\/pages\/contact\"\u003econtact our customer service team\u003c\/a\u003e before placing your order to arrange shipping and receive a freight quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Documents:\u003c\/strong\u003e \u003ca href=\"#\" target=\"_blank\"\u003eTDS (Technical Data Sheet)\u003c\/a\u003e | \u003ca href=\"#\" target=\"_blank\"\u003eSDS (Safety Data Sheet)\u003c\/a\u003e\u003c\/p\u003e","brand":"Pro Coatings","offers":[{"title":"Pint","offer_id":64097219543409,"sku":"SF-LV-SLW-1.5QT","price":69.99,"currency_code":"USD","in_stock":false},{"title":"Quart","offer_id":64130355724657,"sku":null,"price":69.99,"currency_code":"USD","in_stock":false},{"title":"1\/2 Gallon","offer_id":64097219641713,"sku":"SF-LV-SLW-1.5GAL","price":189.99,"currency_code":"USD","in_stock":false},{"title":"Gallon","offer_id":64097219740017,"sku":"SF-LV-SLW-3GAL","price":349.99,"currency_code":"USD","in_stock":false},{"title":"5 Gallon","offer_id":64130355790193,"sku":null,"price":69.99,"currency_code":"USD","in_stock":false},{"title":"15 Gallon","offer_id":64130355855729,"sku":null,"price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1613\/1185\/files\/seaforge_slow_hardener_gallon.png?v=1788499290"},{"product_id":"2-1-epoxy-pumps","title":"2:1 Epoxy Pumps","description":"\u003ch2\u003e2:1 Marine Epoxy Precision Metering Pump Set\u003c\/h2\u003e\n\u003cp\u003eTake the guesswork out of your resin projects. Designed specifically for \u003cb\u003e2:1 ratio marine epoxy systems\u003c\/b\u003e, this calibrated pump set delivers the exact amount of resin and hardener with a single, synchronized stroke. No more messy measuring cups, no more math, and zero wasted material.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003ePerfect 2:1 Calibration:\u003c\/b\u003e One full depression of the resin pump combined with one full depression of the hardener pump yields the precise 2:1 mixing ratio required for a flawless cure.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eHeavy-Duty Marine Grade:\u003c\/b\u003e Built to withstand high-viscosity resins and harsh chemical hardeners without clogging or leaking.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eVariable Depth Intake:\u003c\/b\u003e Includes a full-length intake tube for standard 1-gallon jugs and a shortened intake tube for 1\/2-gallon hardener containers.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eDrip-Free Spouts:\u003c\/b\u003e Engineered with crisp, clean-dispensing tips to minimize sticky messes and keep your workspace pristine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eStandard Screw Caps:\u003c\/b\u003e Features universal threaded caps that securely fit most standard marine epoxy containers.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003e(1) Calibrated Resin Pump\u003c\/b\u003e (Longer intake tube for 1-Gallon Jugs)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003e(1) Calibrated Hardener Pump\u003c\/b\u003e (Shorter intake tube for 1\/2-Gallon Jugs)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cb\u003ePro Tip:\u003c\/b\u003e Always ensure you depress each pump completely to the bottom of the stroke to maintain the exact 2:1 ratio. For first-time use, prime each pump separately into a waste container until a steady stream flows.\u003c\/p\u003e\n\u003c\/blockquote\u003e","brand":"ProCoatings","offers":[{"title":"Default Title","offer_id":64097247527281,"sku":null,"price":15.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1613\/1185\/files\/Gemini_Generated_Image_8ptzn48ptzn48ptz.png?v=1782245752"},{"product_id":"seaforge-timberblend-structural-wood-epoxy-additive","title":"SeaForge Wood Flour - Structural Wood Filler","description":"\u003ch2\u003e\u003cspan\u003eWood Flour\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eNatural Wood Epoxy Filler for Structural Bonding and Fillets\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSeaForge Wood Flour is a finely processed natural wood filler used to thicken epoxy for structural bonding, fillets, gap filling, and laminating. It mixes easily with epoxy to create a smooth, non-sagging compound with a natural wood tone, making it especially well suited for stitch-and-glue construction and other wooden boatbuilding applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003ePrimary Applications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eStructural Bonding | Fillets | Gap Filling | Laminating | Stitch-and-Glue Construction\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhy Builders Choose Wood Flour\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eExcellent Structural Fillets:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Produces strong, smooth fillets for joining plywood panels, bulkheads, frames, and other structural components.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eGood Gap Filling:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Adds body to epoxy, allowing it to bridge gaps and irregular joints while remaining in place.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eNon-Sagging:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Can be mixed to a thick consistency for fillets and other applications where the epoxy needs to hold its shape.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eEconomical Thickener:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Adds substantial volume and body to mixed epoxy, making it an economical choice for larger fillets and bonding applications.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eNatural Wood Color:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Creates a warm, wood-toned epoxy mixture that blends well with many wooden boatbuilding projects.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eProduct Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eBrand:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e SeaForge™ by Pro Coatings LLC\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMaterial:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Finely processed wood flour\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eColor:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Natural Wood Tone\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAvailable Sizes:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 1 Pint | 1 Quart | 1 Gallon | Bulk Containers\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eCompatibility:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Formulated for SeaForge Clear Epoxy Resin and Fast and Slow Hardeners. Compatible with most standard marine epoxy systems.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eOrigin:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Natural product sourced in the USA\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eHow to Use\u003c\/span\u003e\u003c\/h3\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMix the Epoxy First:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Thoroughly mix SeaForge Epoxy Resin (Part A) and Hardener (Part B) at the specified ratio before adding Wood Flour.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAdd Filler Gradually:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Stir Wood Flour into the mixed epoxy until you reach the consistency needed for the application.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eFor Fillets:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Add Wood Flour until the epoxy reaches a smooth, non-sag, peanut-butter-like consistency. Apply and shape with a rounded filleting tool.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eFor Gap Filling:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Use a thicker mixture that will bridge the gap and remain in place without sagging.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eFor Bonding \u0026amp; Laminating:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Add enough Wood Flour to create a smooth, thickened mixture that spreads easily. Apply to the mating surfaces and assemble the parts.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePro Tip:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e When fiberglass reinforcement is required over a structural fillet, fiberglass tape or cloth can often be applied while the fillet is still uncured. This reduces sanding and additional surface preparation. Shape the fillet and clean up excess material before cure for an easier, cleaner finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSafety \u0026amp; Handling\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWear appropriate protective clothing, chemical-resistant gloves, and safety glasses when mixing and applying epoxy. Avoid skin and eye contact. Work in a well-ventilated area and follow all precautions and first-aid instructions provided on the product label and Safety Data Sheet (SDS).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003e⚠️ California Proposition 65 Warning:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Refer to the product label and SDS for applicable chemical information.\u003c\/span\u003e\u003c\/p\u003e","brand":"ProCoatings","offers":[{"title":"1 Quart","offer_id":64097283998065,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false},{"title":"1\/2 Gallon","offer_id":64097284030833,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1613\/1185\/files\/wood_flour_quart_tub.png?v=1788500779"},{"product_id":"seaforge-timberblend-structural-wood-epoxy-additive-copy","title":"SeaForge Colloidal Silica - Anti-Sag Epoxy Thickener","description":"\u003ch2\u003e\u003cspan\u003eColloidal Silica\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eEpoxy Thickener for Structural Bonding, Fillets, and Non-Sag Applications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSeaForge Colloidal Silica is a lightweight silica additive used to thicken epoxy for bonding, fillets, gap filling, and laminating. It produces a smooth, non-sagging mixture with excellent structural strength. Once cured, the mixture is exceptionally hard and durable, making it ideal for structural joints and areas where a tough, impact-resistant surface is desired.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003ePrimary Applications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eStructural Bonding | Fillets | Gap Filling | Laminating\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhy Builders Choose Colloidal Silica\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSuperior Structural Bonding:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Creates a strong, hard epoxy adhesive for demanding structural joints.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHard \u0026amp; Durable:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Cures to an exceptionally hard surface, making it well suited for reinforcing edges, corners, and other areas subject to wear or impact.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eNon-Sagging:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Helps thickened epoxy stay in place rather than running or sagging.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSmooth Consistency:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Produces a smooth, easy-to-spread adhesive mixture.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eGap Filling:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Thickens epoxy for joints where a perfect fit is not possible.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eProduct Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"isSelectedEnd\"\u003e\n\u003cstrong\u003e\u003cspan\u003eBrand:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e SeaForge™ by Pro Coatings LLC\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMaterial:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Colloidal Silica\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eColor:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e White\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAvailable Sizes:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e 1 Pint | 1 Quart | 1 Gallon\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eCompatibility:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Formulated for SeaForge Clear Epoxy Resin and Fast and Slow Hardeners. Compatible with most standard marine epoxy systems.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eOrigin:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Made in the USA\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eHow to Use\u003c\/span\u003e\u003c\/h3\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMix the Epoxy First:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Thoroughly mix SeaForge Epoxy Resin (Part A) and Hardener (Part B) at the specified ratio before adding Colloidal Silica.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAdd Filler Gradually:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Slowly stir Colloidal Silica into the mixed epoxy until you reach the consistency needed for the application. Avoid creating airborne dust during mixing.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eFor Bonding \u0026amp; Laminating:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Add enough Colloidal Silica to create a smooth, thickened mixture that spreads easily but does not readily run out of the joint. Apply to the mating surfaces and assemble the parts.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eFor Fillets:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Add Colloidal Silica until the epoxy reaches a smooth, non-sag consistency. It can also be \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ecombined with wood flour\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e for structural fillets. Apply and shape with a rounded filleting tool.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eFor Gap Filling:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Use a thicker mixture that will bridge the gap and remain in place without sagging.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eFiberglass Structural Fillets:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e When fiberglass reinforcement is required, apply fiberglass tape or cloth according to the project instructions. When possible, fiberglass can be applied while the fillet is still uncured, reducing sanding and additional preparation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003ePro Tip:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Clean up excess epoxy and squeeze-out before it cures. Colloidal Silica mixtures cure extremely hard and are difficult to sand, so a little cleanup while the epoxy is still workable can save considerable sanding later.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSafety \u0026amp; Handling\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWear appropriate protective clothing, chemical-resistant gloves, and safety glasses when mixing and applying epoxy. Avoid skin and eye contact. Work in a well-ventilated area and follow all precautions and first-aid instructions provided on the product label and Safety Data Sheet (SDS).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003e⚠️ California Proposition 65 Warning:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Refer to the product label and SDS for applicable chemical information.\u003c\/span\u003e\u003c\/p\u003e","brand":"ProCoatings","offers":[{"title":"1 Quart","offer_id":64097320206705,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false},{"title":"1\/2 Gallon","offer_id":64097320239473,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1613\/1185\/files\/colloidal_silica_quart_tub.png?v=1788500781"},{"product_id":"seaforge-cellulink-filleting-fairing-cellulose-blend","title":"SeaForge Cellulose Filler - Filleting \u0026 Fairing Cellulose Blend","description":"\u003cdiv class=\"flex max-w-full flex-col gap-4 grow\"\u003e\n\u003cdiv dir=\"auto\" class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal outline-none keyboard-focused:focus-ring [.text-message+\u0026amp;]:mt-1\" tabindex=\"0\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden\"\u003e\n\u003cdiv class=\"markdown prose dark:prose-invert wrap-break-word w-full light markdown-new-styling\"\u003e\n\u003ch1 class=\"PDq2pG_selectionAnchorContainer\"\u003eCellulose Filler\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Epoxy Filler for Bonding, Filling \u0026amp; Filleting\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSeaForge Cellulose Filler is a lightweight, fiber-based additive for thickening epoxy for \u003cstrong\u003ebonding, laminating, filleting, and gap filling\u003c\/strong\u003e. It blends easily into mixed epoxy to create a smooth, workable adhesive or non-sag paste.\u003c\/p\u003e\n\u003cp\u003eExcellent for structural bonding, it is commonly used for installing \u003cstrong\u003ebreasthooks, stringers, frames, and bulkheads\u003c\/strong\u003e, laminating two substrates together, and creating smooth structural fillets.\u003c\/p\u003e\n\u003ch3\u003eWhy Boatbuilders Choose Cellulose Filler\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent for Bonding:\u003c\/strong\u003e Creates a strong, gap-filling adhesive for structural assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for Laminating:\u003c\/strong\u003e Produces a smooth, spreadable mixture for bonding two substrates together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth Fillets:\u003c\/strong\u003e Easily tooled into clean, consistent radii.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap Filling:\u003c\/strong\u003e Adds body to epoxy to bridge gaps and irregular mating surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Consistency:\u003c\/strong\u003e Add more or less filler to achieve the viscosity needed for the job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile:\u003c\/strong\u003e Can be used alone or blended with other epoxy fillers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrimary Applications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStructural Bonding | Laminating | Stitch-and-Glue Fillets | Gap Filling | General Assembly | Filling Voids \u0026amp; Gouges\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e SeaForge™ by Pro Coatings LLC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Finely processed cellulose fibers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable Sizes:\u003c\/strong\u003e 1 Pint | 1 Quart | 1 Gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Formulated for SeaForge Clear Epoxy Resin and Fast and Slow Hardeners. Compatible with most standard marine epoxy systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrigin:\u003c\/strong\u003e Natural product sourced in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix the Epoxy First:\u003c\/strong\u003e Thoroughly mix SeaForge Epoxy Resin (Part A) and Hardener (Part B) at the specified ratio before adding Cellulose Filler.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd Filler Gradually:\u003c\/strong\u003e Stir Cellulose Filler into the mixed epoxy until you reach the consistency needed for the application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Bonding \u0026amp; Laminating:\u003c\/strong\u003e Add enough filler to create a smooth, thickened mixture that spreads easily but does not readily run out of the joint. Apply to the mating surfaces and assemble the parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Fillets:\u003c\/strong\u003e Add filler until the epoxy reaches a smooth, non-sag, peanut-butter-like consistency. Cellulose Filler can also be \u003cstrong\u003ecombined with wood flour\u003c\/strong\u003e for structural fillets. Apply and shape with a rounded filleting tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor Gap Filling:\u003c\/strong\u003e Use a thicker mixture that will bridge the gap and remain in place without sagging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiberglass Structural Fillets:\u003c\/strong\u003e When fiberglass reinforcement is required, apply fiberglass tape or cloth according to the project instructions. When possible, fiberglass can be applied while the fillet is still uncured, reducing sanding and additional preparation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"z-0 flex min-h-[46px] justify-start\"\u003e\n\u003ch3\u003e\u003cspan\u003eSafety \u0026amp; Handling\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWear appropriate protective clothing, chemical-resistant gloves, and safety glasses when mixing and applying epoxy. Avoid skin and eye contact. Work in a well-ventilated area and follow all precautions and first-aid instructions provided on the product label and Safety Data Sheet (SDS).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003e⚠️ California Proposition 65 Warning:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Refer to the product label and SDS for applicable chemical information.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"mt-3 w-full empty:hidden has-[\u0026gt;_:empty]:hidden\"\u003e\n\u003cdiv class=\"text-center\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"inline-flex border border-gray-100 dark:border-gray-700 rounded-xl\"\u003e\n\u003cdiv class=\"bg-token-main-surface-tertiary w-px flex-1 self-stretch\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ProCoatings","offers":[{"title":"1 Quart","offer_id":64097329906033,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false},{"title":"1\/2 Gallon","offer_id":64097329938801,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1613\/1185\/files\/cellulose_filler_quart.png?v=1788499404"},{"product_id":"seaforge-featherfair-ultra-light-microballoon-fairing-compound","title":"SeaForge Phenolic Micro Balloons - Fairing Filler","description":"\u003ch2\u003e\u003cspan\u003eSeaForge™ Phenolic Micro Balloons\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAchieve smooth, professional-quality fairing with \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eSeaForge Phenolic Micro Balloons by Pro Coatings\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. These ultra-low-density hollow spheres are designed to be blended into mixed epoxy resin to create a lightweight, creamy fairing compound that spreads easily and sands exceptionally well.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIdeal for smoothing large hull surfaces, fairing composite structures, and repairing surface gouges and imperfections, SeaForge Phenolic Micro Balloons add volume with minimal weight. The resulting fairing compound spreads smoothly with less drag than heavier fillers and sands easily after cure, reducing labor while helping you achieve a smooth, accurate surface ready for primer and paint.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhy Boatbuilders Choose SeaForge Phenolic Micro Balloons\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eEasy Sanding:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Creates an epoxy fairing compound that sands quickly and smoothly, reducing the time and effort required to achieve the final profile.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eUltra-Lightweight:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Hollow phenolic spheres add substantial volume to mixed epoxy while keeping the finished fairing compound lightweight.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSmooth Application:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Produces a creamy, easy-to-spread consistency that can be thickened as needed for vertical or overhead surfaces.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAbove \u0026amp; Below the Waterline:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Suitable for fairing marine epoxy surfaces above and below the waterline when used as part of a properly applied epoxy coating system.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eVersatile Consistency:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Add more or less filler to adjust the mixture from a smooth fairing compound to a thicker, non-sag paste.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003ePrimary Applications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eHull Fairing | Lightweight Filler | Composite Fairing | Gouge \u0026amp; Surface Repair | Blister Repair\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eProduct Specifications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eBrand:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e SeaForge™ by Pro Coatings LLC\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMaterial:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Phenolic Micro Balloons \/ Hollow Spheres \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e Deep Red-Brown\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eContainer Sizes:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Quart, Half-Gallon Tubs \u0026amp; bulk containers.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eCompatibility:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Designed for use with SeaForge Clear Epoxy Resin systems and compatible marine-grade epoxies.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eHow to Use\u003c\/span\u003e\u003c\/h3\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMix the Epoxy:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Thoroughly combine SeaForge Epoxy Resin (Part A) and Hardener (Part B) at the specified mix ratio before adding any filler.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAdd Micro Balloons:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Gradually stir SeaForge Phenolic Micro Balloons into the mixed epoxy until the desired consistency is reached. For heavier fairing and filling, continue adding until the mixture reaches a creamy, non-sag consistency similar to heavy peanut butter.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eApply:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Spread the fairing compound over the properly prepared surface using a plastic epoxy spreader, putty knife, or other suitable fairing tool.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSand:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Allow the epoxy fairing compound to cure fully, then sand to the desired profile using a fearing board, sanding block or sander; 80-120 grip sand paper.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eSeal \u0026amp; Finish:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e After fairing and sanding are complete, apply \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e1–2 coats of unthickened epoxy\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e over the faired surface to fill porosity and seal the fairing compound. Allow the epoxy to cure, then sand the surface smooth and prepare it for the final finish of \u003c\/span\u003epaint or varnish.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cspan\u003eSafety \u0026amp; Handling\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWear appropriate protective clothing, chemical-resistant gloves, and safety glasses when mixing and applying epoxy. Avoid skin and eye contact. Work in a well-ventilated area and follow all precautions and first-aid instructions provided on the product label and Safety Data Sheet (SDS).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003e⚠️ California Proposition 65 Warning:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Refer to the product label and SDS for applicable chemical information.\u003c\/span\u003e\u003c\/p\u003e","brand":"ProCoatings","offers":[{"title":"1 Quart tub","offer_id":64097332625777,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false},{"title":"1\/2 Gallon tub","offer_id":64097332658545,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1613\/1185\/files\/Phenolic_Balloons_quart_tub.png?v=1788500776"},{"product_id":"sea-forge-resin-kit-builder","title":"Sea•Forge Resin Kit Builder","description":"\u003ch2\u003eIntroducing the Sea•Forge Resin Kit Builder\u003c\/h2\u003e\n\u003cp\u003eBuild with confidence using the Sea•Forge Resin Kit Builder, featuring everything you need for your next project! This expertly curated bundle offers:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSea•Forge 2:1 Epoxy Resin\u003c\/strong\u003e in various sizes:\u003c\/li\u003e\n  \u003cul\u003e\n    \u003cli\u003e2 Gallon\u003c\/li\u003e\n    \u003cli\u003e1 Gallon\u003c\/li\u003e\n    \u003cli\u003e1 Quart\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardener Options\u003c\/strong\u003e tailored to your resin size:\u003c\/li\u003e\n  \u003cul\u003e\n    \u003cli\u003e1 Gallon \/ Fast or Slow (for 2 Gallon)\u003c\/li\u003e\n    \u003cli\u003e1\/2 Gallon \/ Fast or Slow (for 1 Gallon)\u003c\/li\u003e\n    \u003cli\u003e1 Pint \/ Fast or Slow (for 1 Quart)\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptional Additives\u003c\/strong\u003e to enhance your resin:\u003c\/li\u003e\n  \u003cul\u003e\n    \u003cli\u003eCelluLink (available in 1 Pint, 1 Quart, 1\/2 Gallon)\u003c\/li\u003e\n    \u003cli\u003eFeatherFair (available in 1 Pint, 1 Quart, 1\/2 Gallon)\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2:1 Pumps\u003c\/strong\u003e to ensure precise mixing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis bundle simplifies your projects and guarantees top-notch results in challenging marine environments. Unleash your creativity and make your next build a masterpiece!\u003c\/p\u003e","brand":"ProCoatings","offers":[{"title":"Default Title","offer_id":64104517140849,"sku":null,"price":679.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1613\/1185\/files\/Gemini_Generated_Image_3ux4gc3ux4gc3ux4_2_a955bf99-023d-40f4-84ad-07c36a2ddaad.png?v=1789414898"},{"product_id":"sea-forge-2-1-non-blush-fast-epoxy-hardener","title":"Sea•Forge Fast Epoxy Hardener – 2:1 Non-Blush","description":"\u003ch1\u003e\u003cspan\u003eFast Hardener\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eFaster Cure for Cool Weather \u0026amp; Quick Turnarounds.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSea•Forge Fast Hardener is a non-blushing Part B hardener designed for use with Sea•Forge Low Viscosity Epoxy Resin. Its faster cure reduces turnaround time for fiberglassing, laminating, bonding, coating, and repairs, especially in cooler working conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePair with Sea•Forge Low Viscosity Epoxy Resin as part of the Sea•Forge 2:1 Epoxy System.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhy Builders Choose Sea•Forge Fast Hardener\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eFaster Cure:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Shortens cure and recoat times for projects where faster turnaround is important.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eNon-Blushing Formula:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Designed to cure without amine blush, reducing surface preparation between coats.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eIdeal for Cool Conditions:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Faster cure helps maintain practical working and cure times as shop and material temperatures decrease.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eFaster Recoat Times:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Helps move fiberglassing, coating, and laminating projects through multiple applications more quickly.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eExcellent for Repairs \u0026amp; Smaller Jobs:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Well suited to projects where shorter working and cure times are an advantage.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eStrong Adhesion:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Creates strong, durable bonds to wood, fiberglass, composites, and properly prepared metals.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eBalanced Strength \u0026amp; Flexibility:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Formulated to provide a strong, tough bond with the flexibility needed to accommodate normal movement and stresses in wood, fiberglass, and composite structures.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMarine Applications:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Formulated for boatbuilding, repair, restoration, and composite construction.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eLow VOC:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Formulated with low volatile organic compound content.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eSea•Forge 2:1 Epoxy System\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003ePart A — Epoxy Resin:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Clear, low-viscosity resin for coating, bonding, laminating, and fiberglass wet-out.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003ePart B — Fast Hardener:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Faster curing hardener for cooler conditions, repairs, smaller projects, and applications requiring shorter turnaround times.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAlways mix \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e2 parts Part A Epoxy Resin : 1 part Part B Hardener by volume. Do not alter this ratio.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003ePrimary Applications\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eBoatbuilding | Cool-Weather Epoxy Work | Fiberglass \u0026amp; Composite Cloths | Vacuum Bagging | Structural Bonding | Filleting | Coating \u0026amp; Saturation | Repairs\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003eHow to Use\u003c\/span\u003e\u003c\/h3\u003e\n\u003col start=\"1\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMeasure:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Mix \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e2 parts Sea•Forge Low Viscosity Epoxy Resin : 1 part Sea•Forge Fast Hardener by volume. Do not alter this ratio.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Use graduated mixing cups for accurate measurement of small or large batches, or use calibrated 2:1 dispensing pumps. Test pumps for accuracy before first use and before mixing a large batch.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eMix Thoroughly:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Stir the resin and hardener completely, scraping the sides and bottom of the mixing container.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eApply:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Use mixed epoxy for coating, fiberglass wet-out, laminating, and bonding.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eFor Bonding \u0026amp; Fillets:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e When thickened epoxy is needed, add the appropriate Sea•Forge filler only after the resin and hardener have been thoroughly mixed.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAdjust Cure Speed:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Sea•Forge Slow Hardener may be blended with Fast Hardener when additional working time is desired. Maintain the required \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e2 parts resin : 1 part total hardener by volume\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e ratio.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAllow to Cure:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Cure time varies with hardener blend, temperature, application thickness, batch size, and working conditions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003e\u003cspan\u003eSafety \u0026amp; Handling\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWear appropriate protective clothing, chemical-resistant gloves, and safety glasses when mixing and applying epoxy. Avoid skin and eye contact. Work in a well-ventilated area and follow all precautions and first-aid instructions provided on the product label and Safety Data Sheet (SDS).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003e⚠️ California Proposition 65 Warning:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Refer to the product label and SDS for applicable chemical information.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Documents:\u003c\/strong\u003e \u003ca href=\"#\" target=\"_blank\"\u003eTDS (Technical Data Sheet)\u003c\/a\u003e | \u003ca href=\"#\" target=\"_blank\"\u003eSDS (Safety Data Sheet)\u003c\/a\u003e\u003c\/p\u003e","brand":"Pro Coatings","offers":[{"title":"Pint","offer_id":64406550282609,"sku":"SF-LV-SLW-1.5QT","price":69.99,"currency_code":"USD","in_stock":false},{"title":"Quart","offer_id":64406550315377,"sku":null,"price":69.99,"currency_code":"USD","in_stock":false},{"title":"1\/2 Gallon","offer_id":64406550348145,"sku":"SF-LV-SLW-1.5GAL","price":189.99,"currency_code":"USD","in_stock":false},{"title":"Gallon","offer_id":64406550380913,"sku":"SF-LV-SLW-3GAL","price":349.99,"currency_code":"USD","in_stock":false},{"title":"5 Gallon","offer_id":64406550413681,"sku":null,"price":69.99,"currency_code":"USD","in_stock":false},{"title":"15 Gallon","offer_id":64406550446449,"sku":null,"price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1613\/1185\/files\/seaforge_fast_gallon_jug.png?v=1788498316"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1021\/1613\/1185\/collections\/sea_forge_fast_kit.png?v=1786626302","url":"https:\/\/procoatingsllc.com\/collections\/epoxies-1.oembed","provider":"ProCoatings LLC","version":"1.0","type":"link"}